en
MVR Evaporator
MVR Evaporator

MVR evaporator manufacturers

Brand: WTEYA GROUP
MOQ: 10 Pieces
Delivery time: 15 Day
MVR inorganic water evaporator is a equipment using mechanical vapor compression technology (MVR) to evaporate efficiently and clean inorganic sewage.
Through the evaporator process, the sewage water is deflated, allowing inorganic salt to be rich in storage, thus ensuring complete the purification of sewage and recovery of resources.
Based on the advanced film separation technology, MVR focusing and evaporator, wittya company offers inorganic waste water MVR evaporator and solution to the industry in the direction of energy saving and environmental protection.
Product Details

Product introduction

Characteristics of inorganic sewage

Inorganic sewage is mainly from metallurgy, chemicals, electroplate, mining and other industrial production processes. This drain contains a large amount of inorganic salt such as sulfate, nitrate, chloride, etc. V., these substances are not easy to be biodegraded in water and are easily stored, which seriously affect water quality and ecoenvironment. Untreated direct supply can seriously crack the eco balance of the water environment.

 

Introduction of inorganic sewage MVR evaporator

MVR inorganic water evaporator is a equipment using mechanical vapor compression technology (MVR) to evaporate efficiently and clean inorganic sewage. Through the evaporator process, the sewage water is deflated, allowing inorganic salt to be rich in storage, thus ensuring complete the purification of sewage and recovery of resources. Based on the advanced film separation technology, MVR focusing and evaporator, wittya company offers inorganic waste water MVR evaporator and solution to the industry in the direction of energy saving and environmental protection.

 

Inorganic water MVR evaporator component

Inorganic water MVR evaporator is mainly including pre-heater, evaporator, separator, compressor, condenser and other parts. Of this, the pre-heater is used to increase the temperature of waste water, the evaporator is used to evaporate the water from waste water, the separator is used to separate evaporator water and remaining inorganic salt, The compressor is used to squeeze the separated steam and the condenser is used to condenser the compressed steam into water.

 

Advantages of inorganic water MVR evaporator

Inorganic water MVR evaporator with the following advantages:

High efficiency: using MVR technology, high evaporative efficiency and good treatment efficiency.

Energy saving: using extruded thermal energy, reduce energy consumption and reduce operating cost.

Environmentally friendly: Reduces waste of water and reduces environmental pollution.

Safety: equipment is high stable and safe.

 

Applicable field MVR evaporator inorganic waste water

Inorganic water MVR evaporator is widely used in various industries and sectors such as metallurgy, chemical, electroplate, mining, etc. To create inorganic water. High or low concentration inorganic water can be handled efficiently.

 

Technical principle of

MVR inorganic water evaporator uses mechanical vapor compression (MVR) technology. This technique compressed the evaporator by compressor, expanding its temperature and pressure, and then applied to the evaporator to evaporate again. By this way, the one side can significantly reduce energy consumption during the evaporator, on the other hand can also improve the evaporative efficiency and reach the efficient inorganic water treatment.

 

The production process of

xx

Production of equipment

 

xx

 

Wteya aims to digital and intelligent production to provide superior products and services to its customers. We not only provide a wide range of standard products which are seriously tested and stable performance to meet a wide range of industrial needs. We also provide custom service, as well as OEM and ODM services, professional design team provides proper solutions for customers to meet their unique needs. We will work closely with each customer to ensure that every device suits customer's process requirements and production process accurately. Wteya's one-stop service, innovative to create high-quality mechanical products and system solutions, professionally help customer deal with various water treatment problems.

 

Capacity and size

MVR system parameter board

Evaporator (T/h)

Evaporative way to make

Total energy (kW/h)

Steam consumption (T/h)

Reuse water consumption (T/h)

Area of the (length, height/m)

0.5

MVR, loop required

70

0-0.03

10

6*3*5

1

MVR, loop required

110

0-0.05

10

9*8*6

1.5

MVR, loop required

180

0-0.05

20

12*7.5*9

2

MVR, loop required

213.5

0-0.1

30

12*8*10

3

MVR, loop required

275

0-0.1

50

15*8*15

5

MVR, loop required

425

0-0.2

50

15*10*15

7.5

MVR, loop required

580

0-0.3

70

15*12*15

10

MVR, loop required

815

0-0.3

100

12*6*18

 

Temperature panel parameters

Evaporator (T/h)

Heat exchanger type

Specification (specification)

The material is material

Qty of the quantity

Used to have

0.5

Two horizontal pipe,

Circulation required round

S = 50m ², galls 500 × 6000 × 5mm

TA2

1

 

1

Two horizontal pipe,

Circulation required round

S = 100m ², Nils 650 × 6000 × 5mm

TA2

1

 

1.5

Two horizontal pipe,

Circulation required round

S = 150m ², galls 800 × 6000 × 5mm

TA2

1

 

2

Two horizontal pipe,

Circulation required round

S = 200m ², Nils 800 × 5mm

TA2

1

 

3

Two horizontal pipe,

Circulation required round

S = 260m ², galls 1000 × 6000 × 5mm

TA2

1

 

5

Two horizontal pipe,

Circulation required round

S = 450m ², Nils 1300 × 6000 × 6mm

TA2

1

 

7.5

Two horizontal pipe,

Circulation required round

S = 650m ², Nils 1500 × 6000 × 6mm

TA2

1

 

10

Two horizontal pipe,

Circulation required round

S = 880m ², Nils 1800 × 6000 × 8mm

TA2

1

 

 

Chart of effect chart

xxxx

 

Frequently Asked Questions

Q: MVR forced evaporator to run?

Cause: could be the corrosion of secondary steam pipes or steam compressors, pure water quality does not meet the standards, or at the point of equipment such as welding, flange, sealing, expansion, and so on.

Solution: ensure water quality into standards, regularly cleaning the system, maintain stable cooling water temperature, and provide a complete amount of cooling water.

 

Q: The steam reduction charged by MVR?
Cause: could be due to system clogging or dirt in the hot water catheter.
Solution: do online purification programs for cleaning dirt.

 

Q: The effect of steam valve charged by MVR?
Cause: The material is processed after thickening, crystally, resulting in clogging.
Solution: The Prevention includes regular filter of salt and spray as well, once stuck, use juice or vacuum treatment.

 

Q: MVR compulsory evaporator effect?
Expression: Produces regular and loud sound, vibrates the pipes.
Solution: constant current stability compressor when counter rate is soft and open the valve through the appropriate rate; counter rate need to close the compressor immediately for testing, pay attention to liquid temperature to avoid counter rate.

 

Q: cool MVR evaporator don't work properly?
Cause: could be due to too thick dust, or vacuum drop.
Solution: add agent foaming agent, check detector and dehumidifying liquid, import steam valve adjustment, vacuum control.

 

S/N Single effect evaporator Multi effect evaporator TVR evaporator MVR evaporator
Energy source Using steam heating
Steam pipe network
Need boiler
Using steam heating
Steam pipe network
Need boiler
Need high pressure steam to drive,
Need boiler
Using electric power,
no need steam pipe network
close loop circulation system
Energy consumption 1 tons steam for 1ton water evaporation 0.3~1tons steam for 1ton water evaporation Based on traditional multi effect, one more effect is used with high pressure steam drive The most energy saving technology at present
Operation cost Much higher More energy saving Lower Lowest
Footprint smaller bigger bigger smaller
Product quality Short residence time,
Bigger temp. difference lead to easy scale.
product quality not stable
Longer residence time,
Bigger temp. difference lead to easy scale.
product quality not stable
Short residence time,
Smaller influence on product quality
Short residence time,
Low temp. evaporation,
Minimum impact on product quality
Control type Semi-automatic Full automatic
Uninterrupted evaporation
Full automatic
Uninterrupted evaporation
Full automatic
Uninterrupted evaporation